Level 2 Electrician Turrella

An installation that has been de-energised for six months or more needs a safety inspection before it can be re-energised. We carry out the inspection, rectify anything that comes up, and arrange the reconnection.

If the house has not had Level 2 work done and it was built before the 1970s, there is a reasonable chance they are. Cable size, condition and installation method all matter, and whether they suit the property depends on maximum demand and what you are adding. We can assess it on site.

No. Many switchboard replacements are general electrical work and a licensed electrician can complete them. A Level 2 ASP is required when the work also affects the network connection, the consumer mains, the metering, or needs an authorised disconnection and reconnection. On older boards sitting beside the meter, that is often the case, which is why it is worth establishing before the day.

Not automatically. They are separate parts of the installation. A switchboard can often be replaced on its own, and many switchboard projects can be completed by a licensed electrician. New consumer mains are required where the existing cable is damaged, unsuitable for the installation method, or too small for the assessed maximum demand. The assessment decides, not the age of the board.

Stay well clear, keep people and animals away, and treat the cable as energised even if the property has lost power. Contact your electricity distributor’s emergency line, and call 000 if anyone is in immediate danger. Once the site is safe, a Level 2 ASP repairs or replaces the service, and the work is tested and documented.

A Certificate of Compliance for Electrical Work. It is the legal record that the work meets AS/NZS 3000 and the NSW Service and Installation Rules. You get one on every job we do, and a copy goes to the distributor. Keep it: it is what you hand over at sale, and it is what an insurer asks for.

The distributor owns the network up to the point of supply. From there the service into the building, the point of attachment, any pole standing on your own land and the consumer mains are generally the property owner’s assets, which makes their condition, repair and replacement the owner’s responsibility. It is worth confirming early, because ownership decides who pays.

Both, for different things. Your retailer sells you the electricity, handles the account and arranges the meter through a metering provider. The distributor owns the poles, wires and the connection itself. Physical work on the connection goes through an accredited Level 2 ASP, and we lodge the paperwork with the distributor on your behalf.

A straightforward service line or point of attachment repair is usually a few hours on site. Consumer mains, a switchboard and metering together is commonly most of a day. What stretches a job is rarely the electrical work: it is the distributor application, an outage window that has to be booked, excavation and reinstatement, or approval in a strata building. We tell you which of those apply before you commit.

Yes. Boards installed before the 1990s often sit on backing panels containing asbestos. It is identified before the work starts and handled to the required procedure rather than being discovered halfway through. It affects the method, the time on site and the price. It does not affect whether the job can be done.

Emergency and after-hours attendance is charged at a higher rate than planned work, and we tell you the rate on the phone before anyone is dispatched rather than on the invoice. Where a job is genuinely urgent, such as a cable down or burnt service equipment, it gets attended regardless of the hour. Where it can safely wait for a planned visit, we will say so, because that is the cheaper option for you.

Whether the supply is overhead or underground, cable size and length, route and access, any excavation or reinstatement, whether metering or switchboard work is involved, how much distributor coordination is needed, and whether the job is planned or urgent. We quote once the scope is confirmed.

Turrella is generally within the Ausgrid distribution area. It matters because the application process and the paperwork differ between the two networks, and a form prepared for the wrong one goes nowhere. Boundaries can run through a single street, so we confirm the distributor and the supply arrangement for your individual address before lodging network work.

We answer the phone 24 hours a day, seven days a week, and we aim for same day attendance where the job and our run allow it. Turrella is part of our regular the St George area run rather than somewhere we have to travel specially. Call, tell us what has happened, and we will tell you honestly when we can be there.