Switchboard and Meter Box Relocation Sydney
Meter boxes get built around, built over and built into, and a renovation is usually the point at which somebody finally asks whether it can be moved.
- Planned with your build. Decided at plan stage, not lock-up.
- Meter box, switchboard or both. Cheaper together.
- Certificates on completion. Tested and lodged.
Same Day
Call Out*24 Hour
ElectriciansAll Payments
AcceptedLicensed and
Fully Insured
*Same day call out and the $0 call out fee are subject to availability, location and job type. Conditions apply, ask us when you book.
What Is a Meter Box Relocation?
A meter box relocation moves the meter, the switchboard, or both from their existing position to a new one, along with everything feeding them.
That means the consumer mains are rerouted or replaced to reach the new position, the point of attachment may need to move if the geometry changes, the metering equipment is transferred and reconnected, the switchboard is reinstalled, everything is tested, and supply is restored.
It is not a matter of unscrewing a box and refitting it further along the wall. The supply feeding it has to get there, and that is the bulk of the work.
Why Do Sydney Owners Relocate a Meter Box?
Four reasons, in rough order of frequency.
Renovation. The extension, new kitchen, deck or carport wants the space the meter box occupies. This is the dominant driver.
Access. Meter boxes installed inside garages, behind fixed structures, up high or in cramped positions are difficult to work on and difficult to read. Accessibility requirements have moved since many were installed.
Safety and exposure. A meter box in a position prone to moisture, flooding or mechanical damage is a problem waiting to happen. Along Sydney's river and creek corridors, equipment height is a genuine consideration.
Capacity. Sometimes the existing position simply cannot accommodate the size of switchboard a property now needs, which turns the job into a switchboard upgrade as well.
When Should a Meter Box Relocation Be Planned?
At design stage, and this is the most useful thing on this page.
If you are building, extending or renovating, the meter position should be on the drawings rather than discovered later. A relocation planned into the build is a straightforward job scheduled at a sensible point. The same relocation discovered at lock-up means opening finished work and holding up everything behind it.
Your builder or architect will not always raise it, because from their side it looks like an existing service that is somebody else's problem. Ask the question early. If a power disconnection is already in the build program, the relocation usually pairs with it.
Our Services
All your Level 2 electrical needs covered
Our team has the skills, expertise and accreditation to cover any Level 2 requirement they come across. Every service is backed by safety, quality and experience.
Power Connect and DisconnectConnect a new property to the grid, or disconnect safely for demolition and works.
MeteringMeter installs, relocations and changes, with the paperwork handled.
Overhead Service LinesRepair, replace and install overhead service lines and storm damaged connections.
Underground Service LinesUnderground mains installed, located and repaired, including overhead conversions.
Consumer MainsInspect, repair, upgrade or install the mains feeding your switchboard.
Switchboard UpgradesAgeing fuse boards replaced with a compliant board and safety switches.We handle 23 Level 2 services in total. See the full list.
Why Choose Sydney Level 2 Electrician for Meter Box Relocation
Extending, and the meter box is now in the middle of your new kitchen? It happens constantly. Meter positions were decided decades ago on a floor plan that no longer exists, and Sydney renovations run straight into them. The good news is that a meter box relocation is a well-defined job. The bad news is that it is far easier at plan stage than after the frame is up.
Sydney Level 2 Electrician relocates switchboards and meter boxes across Sydney and the Blue Mountains, with 15 years of supply-side work behind us. We are an accredited Level 2 ASP under the NSW Government's ASP Scheme, authorised on the Ausgrid and Endeavour Energy networks. Every relocation is completed to AS/NZS 3000:2018 and the NSW Service and Installation Rules, with a Certificate of Compliance for Electrical Work issued on completion and our Lifetime Labour Warranty behind it. Free quotes, same-day response, available 24/7.
How Does a Switchboard Relocation Work?
Assessment first: the current setup, where supply comes in, where the new position needs to be, and what the route between them looks like.
Then the supply interruption is arranged with your distributor. The new mounting position is prepared, the mains rerouted or replaced along the new route, the enclosure and metering equipment installed, the switchboard reinstalled and terminated, and everything tested including circuit voltages, load and earth continuity.
Then final inspection, restoration of supply, and compliance documentation issued and lodged. Generally a day for a straightforward residential relocation, longer where the mains run a long way, the route is difficult, or the point of attachment is moving too.
Where we work
Level 2 electricians across Greater Sydney
We are on the road across the whole metropolitan area, from the CBD and the Eastern Suburbs out to Penrith, up to the Hills District and down through the Sutherland Shire. If you are not sure whether we reach you, call and ask.
Should You Upgrade While the Board Is Out?
Almost always worth considering, because the expensive parts of both jobs overlap completely.
A meter box relocation already involves taking supply off, replacing or rerouting the consumer mains, and remounting the switchboard. If the board is aged, full, or still running ceramic fuses, upgrading it at the same time costs far less than a separate job six months later with a second supply interruption.
The same applies to capacity. If you are planning ducted air conditioning, a pool, an EV charger or a granny flat, the mains are being touched anyway, so sizing for the future load now avoids doing it twice. See power supply upgrades and three phase power upgrade.
What Can Complicate a Meter Box Relocation?
Three things, all easier to handle when known early.
Backing panels in older properties. Boards in pre-1990s housing may sit on asbestos-containing panels, which has to be identified and planned around before the board comes off rather than discovered during.
Heritage conservation areas. Where the new position affects a visible facade, council requirements in conservation areas may constrain where the meter box can go. Relevant right through the inner west, inner south and parts of the eastern suburbs, and the same constraint that shapes point of attachment work in those suburbs.
Strata and shared buildings. On apartments and duplexes the metering arrangement often serves more than one lot, bringing in strata approval and building access. Those conversations start early, and the work itself frequently needs an after-hours window.
Talk to Us Before the Frame Goes Up
If a build or renovation is in planning and the meter box is anywhere near the works, the cheap version of this conversation is now.
Call 0485 824 714 or send an enquiry with the current meter position and where you want it, and we will quote free. We will tell you what the relocation involves, what it costs, and where it should sit in your build sequence. Sydney and the Blue Mountains.
Ready to book?
How it works
A simple process for excellent service, right when you need it.
01Contact our team
Reach out by phone, email or the contact form to start the process.
02Discuss the details
Tell us what you need, including property information and any specific concerns.
03Assessment and quote
We schedule a visit or request photos, then provide a detailed quote and timeline.
04Confirmation and booking
Once the quote is approved we book your job at a time that suits you.
05Job completion
We arrive on time with every tool needed to finish the work properly.
06Final check and payment
We inspect and test the work before finalising the paperwork and compliance.
Network checker
Are you on Ausgrid or Endeavour Energy?
Every Level 2 job is lodged with the network that owns the wires in your street, and the paperwork differs between the two. Type your suburb and we will tell you which one you are on. We are accredited for both, so either way you are covered.
A guide only. Network boundaries can split a single street, so we always confirm the network before we lodge anything.
FAQs
Switchboard and Meter Box Relocation questions, answered
The things people ask us most about switchboard and meter box relocation in Sydney. If yours is not here, call and ask.
Why would I move the meter box at all?
Usually because a renovation, extension, new driveway or carport has put it in the way, or because its current position no longer gives the access the distributor requires. Occasionally it is simply that the position is unsafe or unserviceable.
Where is the meter box allowed to go?
Somewhere with safe unobstructed access from outside, clear of hazards, at a compliant height and position. The distributor sets those requirements, so the new location is chosen from what is allowed rather than purely what suits the look of the house.
Does the service line have to move too?
Often yes. Moving where the supply terminates usually means re-terminating the service line and sometimes relocating the point of attachment as well. That is why relocation is quoted as a package rather than as a box being unscrewed and moved.
How long will the power be off?
A relocation is a bigger outage than a straight board swap because the supply is disconnected, the new position is established, and everything is reconnected and tested. Plan on most of a working day for a typical residential job.
Can I do this as part of a renovation?
It is the ideal time. Coordinating the relocation with the build avoids doing finishes twice and avoids a second outage. Bring us in while the plans are still moving rather than once the wall is up.
Get in touch
Need a Level 2 electrician in Sydney?
Metering, service mains, private poles, defect notices and emergency call outs. Tell us what is happening and we will tell you what it takes, what it costs and when we can be there. No obligation either way.
Tap to call, 24/70485 824 714- Free quote, no obligation
- A Level 2 electrician calls you back, not a call centre
- Emergency jobs answered around the clock
Request a call back
Tell us what you need. We reply within 30 minutes during business hours.