
Level 2 Electrician Hornsby
Looking for a Level 2 electrician in Hornsby, NSW? Long spans, tall timber and fire ground, all landing on the same private service line.
- Bushfire land and vegetation. Clearance with the supply isolated.
- Authorised on both networks. Ausgrid and Endeavour Energy.
- Free quotes and $0 call out fee*. On site or from your photos.
Same Day
Call Out*24 Hour
ElectriciansAll Payments
AcceptedLicensed and
Fully Insured
*Same day call out and the $0 call out fee are subject to availability, location and job type. Conditions apply, ask us when you book.
Local Level 2 Electricians in Hornsby, NSW
Need a Level 2 electrician in Hornsby? We are accredited Level 2 ASPs authorised on the Ausgrid network, and Hornsby sits on our regular the North Shore run. Overhead service line repairs, power connections and disconnections and metering and meter enclosure work are what we are called out for here most.
Line down after a storm and nobody can tell you when the power is back? That is supply-side work, which means a Level 2 accredited electrician rather than a general one.
What we are usually looking at in Hornsby is the apartment cluster around the station and the bushland gullies either side of it. Supply to most of Hornsby comes in overhead, off a network pole to a bracket on the building, so the span and the attachment are usually where a job starts. Individual properties vary, and we confirm the arrangement at your address. The housing runs across several decades, so what a job involves depends heavily on when the property was built.
A licensed electrician can carry out general electrical work. An accredited Level 2 ASP is required where the work touches the connection between a property and the network: consumer mains, overhead services, the point of attachment, metering, and authorised disconnection or reconnection. That is what we do, and have done across Sydney for 15 years. Level 2 accredited, authorised on the Ausgrid network covering Hornsby, licence #482784C.

How Hornsby Property Conditions Can Affect Level 2 Work
- Bushfire prone land: Vegetation clearance obligations apply to private service lines, and the work has to be carried out with the supply off. Equipment placement and mounting are worth settling at design stage on a rebuild.
- Mature trees over the service line: Clearance, insulation wear and the load on the attachment all change as vegetation grows. Where the line crosses your own land, clearing around it is the owner’s responsibility and it needs the supply isolated first.
- Strata and shared supply: Lot metering, house services and common property are separate things with separate owners. Establishing which is which, and who can authorise a shutdown, usually decides the timeline more than the electrical work does.
- Renovated and extended homes: Added air conditioning, electric cooking, pool equipment, gates, pumps or EV charging can change maximum demand calculations. The consumer mains and supply capacity should be checked against the proposed load.
Our approach: We do not assume every Hornsby property needs a complete upgrade. We identify equipment that is defective, unsafe or unsuitable for the planned load and recommend only the work required.

Overhead Service Line Repairs in Hornsby, NSW
Vegetation clearance on a private service line is generally the owner’s responsibility, and in Hornsby it comes up often. Nobody should be cutting near a connected service line, so the supply is isolated first.
Overhead service line work in Hornsby covers everything from re-tensioning a sagging span to replacing a line that has come down. With a fallen or damaged line, keep everyone clear and contact your distributor first, then call us. We answer the phone overnight.
Worth a call if you have noticed the span sitting lower than it used to, the whole house flickering when it is windy, or branches touching the line. Hornsby is generally within the Ausgrid distribution area, so that is usually who the application goes to. We confirm it against your address before anything is lodged, because boundaries can run through a single street.

Our Services
All your Level 2 electrical needs covered
Our team has the skills, expertise and accreditation to cover any Level 2 requirement they come across. Every service is backed by safety, quality and experience.
Power Connect and DisconnectConnect a new property to the grid, or disconnect safely for demolition and works.
MeteringMeter installs, relocations and changes, with the paperwork handled.
Overhead Service LinesRepair, replace and install overhead service lines and storm damaged connections.
Underground Service LinesUnderground mains installed, located and repaired, including overhead conversions.
Consumer MainsInspect, repair, upgrade or install the mains feeding your switchboard.
Switchboard UpgradesAgeing fuse boards replaced with a compliant board and safety switches.We handle 23 Level 2 services in total. See the full list.
What we cover
Level 2 Electrical Services We Cover in Hornsby, NSW
Every job below sits on the supply side of your main switch, which is the part that requires an accredited Level 2 ASP. If you are not sure which one describes your problem, describe it on the phone and we will tell you.
Overhead service lines
The span between the network pole and your building. Replacement, re-tensioning, height and clearance corrections, and storm repairs.
Metering and meter enclosures
Not all metering work sits under the same authorisation. Your retailer arranges the meter through a metering provider; the enclosure, the service equipment and any authorised disconnection and reconnection are Level 2 work.
Point of attachment
The bracket or fixing where an overhead service lands on the building. Repaired, relocated or replaced, including after storm damage.
Consumer mains
The cable from the point of supply to your main switchboard. Replaced or upsized where it is damaged, unsuitable for the installation method, or too small for the assessed maximum demand.
Underground service lines
Supply run in conduit from a pillar or pit. Fault location, repair, replacement and new installations, including excavation and reinstatement.
Overhead to underground conversion
Taking the span and the attachment off the building entirely. Scope depends on the cable route, the length, what else is already in the ground and what the connection point allows.
Switchboards and main switches
Replacement boards, RCD protection and main switch work. Many switchboard jobs are general electrical work; a Level 2 ASP is needed where the job also touches the supply, the metering or the mains.
Switchboard and meter box relocation
Moving the board or the enclosure for a renovation, an extension, better access, or to get equipment above a height that has caused a problem before.
Supply and capacity upgrades
Where current or planned demand exceeds what the existing connection can safely carry. Assessed against maximum demand, not against the age of the equipment.
Three phase upgrades
For sustained or heavy loads such as ducted air conditioning, pool plant, workshop or commercial machinery. Plenty of properties are better served by upsizing single phase, and the assessment decides which.
EV charger supply
Most home chargers run on single phase. The real question is whether the existing supply can carry the charger alongside everything else, which is a maximum demand question rather than a phase question.
Defect notice rectification
Rectifying what the distributor has listed, with the certificate lodged on completion. A notice is not a fine, but supply can be disconnected if it is ignored past the date on it.
Supply fault finding
Partial power, flickering, intermittent dropouts or a neutral fault traced with proper test equipment, so nothing is dug up or replaced on a guess.
Supply separation
A second dwelling, granny flat or tenancy needs its own supply, its own metering and its own main switch rather than a share of the existing one.
New connections and subdivisions
New supply for a build, a subdivision or a knockdown rebuild, including the distributor application and its lead time.
What changes the price of Level 2 work in Hornsby
Whether the supply is overhead or underground, the cable size and the length of the run, access to the route, any excavation, conduit or reinstatement, whether metering or switchboard work is involved, how much distributor coordination the job needs, and whether it is planned or urgent.
Underground work in sandstone ground is cutting rather than digging, which changes the method, the time on site and the cost. It is better established before a quote than after.
In a strata building the approval chain and the shutdown window usually set the timeline, and after-hours access is often the practical option.
We quote once the scope is confirmed on site rather than guessing from a photograph, not from a number over the phone.
0485 824 714North Shore
Level 2 electricians near Hornsby
We work across the North Shore regularly, so a job in Hornsby often sits on the same run as these.
- Artarmon
- Asquith
- Balmoral
- Beauty Point
- Beecroft
- Berowra
- Berowra Heights
- Brooklyn
- Cammeray
- Castle Cove
- Castlecrag
- Chatswood
- Chatswood West
- Cheltenham
- Clifton Gardens
- Cowan
- Cremorne
- Cremorne Point
- Crows Nest
- Denistone
- Denistone East
- Denistone West
- East Killara
- East Lindfield
- East Ryde
- Eastwood
- Epping
- Gladesville
- Gordon
- Greenwich
- Hornsby Heights
- Hunters Hill
- Killara
- Kirribilli
- Kurraba Point
- Lane Cove
- Lane Cove North
- Lane Cove West
- Lavender Bay
- Lindfield
- Linley Point
- Longueville
- Macquarie Park
- Marsfield
- McMahons Point
- Meadowbank
- Melrose Park
- Middle Cove
- Milsons Point
- Mosman
- Mount Colah
- Mount Kuring-gai
- Naremburn
- Neutral Bay
- Normanhurst
- North Epping
- North Ryde
- North Sydney
- North Turramurra
- North Wahroonga
- Northbridge
- Northwood
- Putney
- Pymble
- Riverview
- Roseville
- Roseville Chase
- Ryde
- South Turramurra
- St Ives
- St Ives Chase
- St Leonards
- Tennyson Point
- Thornleigh
- Turramurra
- Wahroonga
- Waitara
- Warrawee
- Waverton
- West Pymble
- West Ryde
- Westleigh
- Willoughby
- Willoughby East
- Wollstonecraft
- Woolwich
See everywhere we work in North Shore or browse every region we cover.
Service area
Level 2 Electrician Service Area Around Hornsby, NSW
Hornsby is part of our regular North Shore run rather than somewhere we travel to specially, which is what makes same day attendance realistic here rather than a promise we have to qualify.
- Covered from: our North Shore run, alongside the surrounding suburbs. See the whole North Shore area.
- Distribution network: Hornsby is generally within the Ausgridarea. Boundaries can run through a single street, so we confirm it against your address before anything is lodged.
- Hours: Open 24 hours, 7 days. Emergency and after-hours attendance is quoted at its rate on the phone, before anyone is dispatched.
Also nearby: Artarmon, Asquith, Balmoral, Beauty Point, Beecroft, Berowra
Power Connections and Disconnections in Hornsby, NSW
Any work near a service line in Hornsby needs the supply isolated first. That includes tree work, roofing and anything on scaffolding within reach of the span, and no tree contractor should be working near a live line.
We handle connections and disconnections in Hornsby, usually same day, so the rest of the trades are not standing around waiting.

Meter Installs and Changes in Hornsby, NSW
In Hornsby the metering question is usually about which meter belongs to whom. Lot supply and common property supply are different things with different owners, and settling that before the day is what keeps the job short.
We handle metering across Hornsby: the enclosure, the service equipment, off peak and controlled load circuits and smart meter work. Not all metering falls under the same authorisation, so we identify what applies to your installation and complete or coordinate it with your retailer and metering provider.

Point of Attachment Work in Hornsby, NSW
A service line with branches near it does not sit still, and that movement is carried by the point of attachment. It is a common starting point for Hornsby jobs.
If the bracket at your Hornsby property has moved, corroded or pulled away from the wall, that is point of attachment work and it is ours to do. We assess the arrangement, carry out the repair and issue the compliance paperwork.

Overnight and Weekend Level 2 Work in Hornsby
In a Hornsby building, a shutdown affects every resident. Doing the work after hours is usually the difference between a straightforward job and a building full of complaints.
We run 24 hour Level 2 work throughout Hornsby: planned after-hours shutdowns, overnight changeovers and weekend work, quoted before we start.

24 Hour Emergency Level 2 Work in Hornsby, NSW
Storm and fire ground means Hornsby can lose supply more often than sheltered parts of Sydney, and it rarely happens at a convenient hour.
We answer the phone 24 hours a day, seven days a week, and we run emergency call outs throughout Hornsby. If a line is down, keep everyone well clear of it and call from a safe distance.
Call 0485 824 714. Quotes are free.

Worth knowing first
Level 2 Electrical Work in Hornsby, NSW: What People Assume
Most of the confusion we hear on the phone comes down to the same handful of things. Some of these mean you do not need us, which is worth knowing before you pay anyone.
A switchboard upgrade always means new consumer mains.
In practice: They are separate parts of the installation. A switchboard can often be replaced on its own. New consumer mains are required where the existing cable is damaged, unsuitable for the installation method, or too small for the assessed maximum demand. The assessment decides that, not the age of the board.
Every switchboard job needs a Level 2 electrician.
In practice: It does not. Many switchboard replacements are general electrical work and a licensed electrician can complete them. A Level 2 ASP is required where the work also affects the network connection, the consumer mains, the metering, or needs an authorised disconnection and reconnection. Worth establishing before the day rather than on it.
An old installation is automatically defective or undersized.
In practice: Age on its own is not a defect. Plenty of older supply equipment is in serviceable condition and compliant with what applied when it was installed. What matters is its actual condition and whether it suits the load the property now runs. That is an inspection, not an assumption.
Visible staining or rust means the equipment is unsafe.
In practice: Surface marking is a reason to look, not a diagnosis. Exposure may contribute to deterioration, but it does not establish that a given fitting has failed. Condition is assessed on the hardware itself, its mechanical load and what is behind the enclosure door.
One electrician handles everything to do with the meter.
In practice: Metering responsibilities and authorisations differ. Your retailer arranges the meter itself through a metering provider. The enclosure, the service equipment and any authorised disconnection and reconnection sit with a Level 2 ASP. We identify which parts apply to your installation and complete or coordinate them accordingly.
Properties in the same street have the same supply arrangement.
In practice: They often do not. One property may be fed by an overhead service to a point of attachment while the next has underground consumer mains from a pillar, and metering arrangements can differ again. We confirm what your address actually has before quoting or lodging anything.
Before we arrive
Staying safe until we get to you in Hornsby
- After a storm or a fire. A service line on the ground, caught in a tree or hanging lower than it should is live until proven otherwise. Stay at least 8 metres back, keep children and pets inside, and do not try to move it or prop it up.
- Keep clear of damaged equipment. Never attempt to move, support or reconnect an overhead service cable, and do not touch the meter box, the service line or a private pole that looks damaged. Treat all of it as live.
- Fire, or anyone in danger. Call 000 first. Fire and rescue will make the scene safe and have the supply cut if it needs to be. Call us after that, not instead of it.
Call 0485 824 714 and describe what you can see from somewhere safe. You get someone who does this work, not a call centre, and they will tell you straight away whether it has to be made safe tonight or whether it can wait until morning.
0485 824 714On the tools in Hornsby
The work we do around Hornsby
A sense of what actually comes up here, and why. If yours looks like one of these, describe it on the phone and we will tell you what is involved.
Overhead service line replacement
The span had been rubbed through where it passed the trees and was arcing in the wind. Replaced the run end to end and restored clearance.
Clearance around private service lines is a constant on this sort of block.
More on thisTemporary disconnection
Temporary disconnection arranged for roofing works, with the property back on supply that afternoon.
More on thisMeter installation
Additional meter installed and the existing board reworked to suit, then notified to the distributor.
More on this
Something similar at your place? Call 0485 824 714 and describe it. Free quotes, 24 hours a day.
Ready to book?
How it works
A simple process for excellent service, right when you need it.
01Contact our team
Reach out by phone, email or the contact form to start the process.
02Discuss the details
Tell us what you need, including property information and any specific concerns.
03Assessment and quote
We schedule a visit or request photos, then provide a detailed quote and timeline.
04Confirmation and booking
Once the quote is approved we book your job at a time that suits you.
05Job completion
We arrive on time with every tool needed to finish the work properly.
06Final check and payment
We inspect and test the work before finalising the paperwork and compliance.
Network checker
Are you on Ausgrid or Endeavour Energy?
Every Level 2 job is lodged with the network that owns the wires in your street, and the paperwork differs between the two. Type your suburb and we will tell you which one you are on. We are accredited for both, so either way you are covered.
A guide only. Network boundaries can split a single street, so we always confirm the network before we lodge anything.
FAQs
Level 2 electrician Hornsby, questions answered
What people in Hornsby ask before they book. If yours is not here, call and ask.
My service line came down in a storm, who fixes it?
The network handles the street side. Everything from their pole to your building is Level 2 work, which is us. Call as soon as it is safe to, keep everyone well clear of the line, and assume it is live until proven otherwise.
Do I have to keep vegetation clear of my service line?
Where the line crosses your own land, yes, that is the owner’s obligation. The work should never be done near a live line. We isolate the supply, the clearing happens safely, and we reconnect.
What should I do if a service cable comes down in a storm?
Stay well clear, keep people and animals away, and treat the cable as energised even if the property has lost power. Contact your electricity distributor’s emergency line, and call 000 if anyone is in immediate danger. Once the site is safe, a Level 2 ASP repairs or replaces the service, and the work is tested and documented.
Who is responsible for the electricity meter?
Not all metering work falls under the same authorisation. Your retailer arranges the meter itself through a metering provider, while the enclosure, the service equipment and any authorised disconnection and reconnection are Level 2 work. We identify which parts apply to your installation and complete or coordinate them accordingly.
What is a CCEW and will I get one?
A Certificate of Compliance for Electrical Work. It is the legal record that the work meets AS/NZS 3000 and the NSW Service and Installation Rules. You get one on every job we do, and a copy goes to the distributor. Keep it: it is what you hand over at sale, and it is what an insurer asks for.
Who owns the wiring between the street and my switchboard?
The distributor owns the network up to the point of supply. From there the service into the building, the point of attachment, any pole standing on your own land and the consumer mains are generally the property owner’s assets, which makes their condition, repair and replacement the owner’s responsibility. It is worth confirming early, because ownership decides who pays.
Do I deal with the distributor or my electricity retailer?
Both, for different things. Your retailer sells you the electricity, handles the account and arranges the meter through a metering provider. The distributor owns the poles, wires and the connection itself. Physical work on the connection goes through an accredited Level 2 ASP, and we lodge the paperwork with the distributor on your behalf.
How long does this kind of work take?
A straightforward service line or point of attachment repair is usually a few hours on site. Consumer mains, a switchboard and metering together is commonly most of a day. What stretches a job is rarely the electrical work: it is the distributor application, an outage window that has to be booked, excavation and reinstatement, or approval in a strata building. We tell you which of those apply before you commit.
My board sits on an asbestos backing panel. Can it still be upgraded?
Yes. Boards installed before the 1990s often sit on backing panels containing asbestos. It is identified before the work starts and handled to the required procedure rather than being discovered halfway through. It affects the method, the time on site and the price. It does not affect whether the job can be done.
Do you charge more for after hours and weekend work?
Emergency and after-hours attendance is charged at a higher rate than planned work, and we tell you the rate on the phone before anyone is dispatched rather than on the invoice. Where a job is genuinely urgent, such as a cable down or burnt service equipment, it gets attended regardless of the hour. Where it can safely wait for a planned visit, we will say so, because that is the cheaper option for you.
What affects the cost of this work?
Whether the supply is overhead or underground, cable size and length, route and access, any excavation or reinstatement, whether metering or switchboard work is involved, how much distributor coordination is needed, and whether the job is planned or urgent. We quote once the scope is confirmed.
Is Hornsby on Ausgrid or Endeavour Energy?
Hornsby is generally within the Ausgrid distribution area. It matters because the application process and the paperwork differ between the two networks, and a form prepared for the wrong one goes nowhere. Boundaries can run through a single street, so we confirm the distributor and the supply arrangement for your individual address before lodging network work.
How fast can you get to Hornsby?
We answer the phone 24 hours a day, seven days a week, and we aim for same day attendance where the job and our run allow it. Hornsby is part of our regular the North Shore run rather than somewhere we have to travel specially. Call, tell us what has happened, and we will tell you honestly when we can be there.

Get in touch
Need a Level 2 electrician in Sydney?
Metering, service mains, private poles, defect notices and emergency call outs. Tell us what is happening and we will tell you what it takes, what it costs and when we can be there. No obligation either way.
Tap to call, 24/70485 824 714- Free quote, no obligation
- A Level 2 electrician calls you back, not a call centre
- Emergency jobs answered around the clock
Request a call back
Tell us what you need. We reply within 30 minutes during business hours.